MIC/ LINE INPUT

General purpose high performance 200 ohm 1:1 transformer. For isolating and balancing a 200 ohm line or microphone input +10 dBu at 50 Hz. May be used as a splitter so one microphone can feed 2 desks One direct, and the other isolated. Mumetal can with colour coded leads.

High performance 200 ohm 1:1 transformer. For isolating and balancing a 200 ohm line or microphone input +10 dBu at 50 Hz. Designed for Soundcraft series 200 desks. Available with colour coded leads or PCB pins.

General purpose mic input. 1:7 ratrio. For driving solid state or tube amp. +4 dBu. SIZE D DIMENSIONS

High performance mic input. 1:7 ratio. As 3195 but improved level, input impedance and bandwidth. +12 dBu

High performance mic input. 1:10 ratio. 200/20k Ohms. Similar to 4935 but increased ratio +12 dBu. Suitable for Telefunken V72 input (without 50 ohm option) and Midas Venice consoles.

Recording quality microphone transformer. Minimal microphone loading and distortion. Full geometric balance in and out. Microphone sees 1k over wide frequency band. Can be used with primary windings in parallel for 50 ohm mics and in series for 200 ohm mics. +18 dBu

50 + 50 / 600CT input transformer. Configurable for 50/600 Ohms or 200/600 Ohms. 100% Mumetal core and can. Internal electrostatic shields for maximum nnoise rejection. Available with octal base if required. A very high spec transformer with excellent bandwidth, minimal distortion, high level capability with minimal insertion loss. Primary inductance (typical) 6.4H DCR 13 Ohms max. Secondary DCR 36 Ohms max. Max input level +21 dbu at 50 Hz.

150 +150 / 600CT input transformer. Configurable for 150/600CT Ohms or 600/600CT Ohms. 100% Mumetal core and can. Internal electrostatic shields for maximum nnoise rejection. Available with octal base if required. A very high spec transformer with excellent bandwidth, minimal distortion, high level capability with minimal insertion loss. Primary inductance (typical) 12.7 H DCR 13 Ohms max. Secondary DCR 23 Ohms max. Max input level +21 dbu at 50 Hz.

600CT / 2.5K +2.5K input transformer. Configurable for 600/10K Ohms or 600/2.5K Ohms. 100% Mumetal core and can. Internal electrostatic shields for maximum nnoise rejection. Available with threaded grommet or octal base if required. A very high spec transformer with excellent bandwidth, minimal distortion, high level capability with minimal insertion loss. Primary inductance (typical) 12.7H. DCR 23.2 Ohms max. Secondary DCR 475 Ohms max. Max input level +21 dBu at 50 Hz.

Good quality input transformer for amplifier requiring a switchable input impedance. 0,+6,+11 dBu

Input transformer. Configurable for 600/2.4K Ohms or 2.4K/24K Ohms. 100% Mumetal core and can. Internal electrostatic shields for maximum nnoise rejection. Available with threaded grommet or octal base if required. A very high spec transformer with excellent bandwidth, minimal distortion, high level capability with minimal insertion loss. Primary inductance typical 50H (in series). DCR 100 + 100 Ohms typical. Secondary DCR 200 Ohms max. Max input level +27 dBu at 50 Hz.

A very high inductance transformer for matching a tube or FET condenser microphone to a 200 ohm line. E.g. Neumann, Telefunken AKG etc. Ratio 5:1. Exceptional bandwidth. Mumetal core for minimal distortion and dynamic range. Thick Mumetal can for screening. Centre tapped secondary for phantom powering. Colour coded leads and optional mounting grommet. Can size 52.5 x 45 mm dia.