SOWTER Type UA238000 Ohms HIGH PERFORMANCE PUSH PULL OUTPUT TRANSFORMER |
PACKAGE DIMENSIONS | STYLE /SIZE REF | |
| Fully Shrouded | SN | ||
| Drop Through | TN | ||
| Open Frame | ON | ||
 |
 |
||
| APPLICATION A high performance output transformer for push-pull KT66 or EL84 etc in Pentode UL or triode mode or similar valves. Replacement for Leak TL12 or TL25 | |||
| FEATURES Highest grade low loss (M6) grain oriented silicon iron core for minimal distortion. 14 interleaved winding sections to maximize bandwidth and ensure clean transient response. Two chamber bobbin to ensure full geometric balance. Low copper resistance to minimize losses and maximize loudspeaker damping. 4 separate secondary windings (See below) for optimum matching to load without the use of tapped windings which can reduce HF response. Other secondary configurations available at time of order. Various package options. The original Leak TL12 had 2/8/18/32 ohm secondary which is available on request. | |||
| Impedance | DC Resistance | Inductance | |
| PRIMARY | 8000 ohms | 200 ohms | 150H |
| SECONDARY | 4/8/16 ohms | 0.56 ohms (16 ohm config) |
0.3 H (8 ohm config) |
| ULTRA LINEAR TAPS | 43% | ||
| LEAKAGE INDUCTANCE referred to primary | 4.25 mH | ||
| VOLTAGE RATIO (8 ohm config) | 22.36:1 | ||
| POWER (For 0.5 % Distortion at 20 Hz) | 40 W | ||
| DISTORTION (30 Watts at 1000Hz) | 0.05 % | ||
| DC QUIESCENT CURRENT | 125 mA max. | ||
| FREQUENCY RESPONSE
(Typical) 5 ohm source (+/- 1.5 dB) |
5 Hz to 50 kHz | ||
| SHIPPING WEIGHT (SIZE CODE N) | 4.9 kg | ||
 |
|||
| E A Sowter Ltd The Boatyard Cullingham Road IPSWICH IP1 2EG England |
Tel: +44(0)1473 252794 Fax: +44(0)1473 236188 |
||