1. Home
  2. View Cart
  3. Checkout

VINTAGE RECORDING AMPLIFIER TRANSFORMERS A to K

Page:   <<   <  1  2   View All (20)

1100 Ferrograph tape head input transformer

1100 Ferrograph tape head input transformer

Ref: 656

Ratio 1:6 300/10k Ohms. Suitable for Series 3 and possibly other models. Mumetal can 34 dia. x 24 high with colour coded leads.

Price: £55.42 (Excluding VAT at 20%)

7490 Lustraphone  M10  Input Transformer 1:10 with a 1:1 tap

7490 Lustraphone M10 Input Transformer 1:10 with a 1:1 tap

Ref: 657

Ratio 1:10 with tap for 1:1 Max input level +9dBu. Sowter designed transformer replacement for the original Lustraphone transformer. Internal electrostatic shield to ensure good common mode noise rejection. Mumetal can 34 mm diameter with colour coded leads and threaded mounting boss.

Price: £61.12 (Excluding VAT at 20%)

1454 Pye 4060 Compressor Output transformer

1454 Pye 4060 Compressor Output transformer

Ref: 658

Ratio 1:1.5. with feedback winding ratio 1:1.44. Max output level +30 dBu at 50 Hz. Bandwidth 20 Hz to 40 kHz. Sowter replacement design for this amazing all transistor compressor. Size "Pro audio K"

Price: £60.35 (Excluding VAT at 20%)

9527 Pulteq EQP1 Mic Pre Mains

9527 Pulteq EQP1 Mic Pre Mains

Ref: 659

Fully shrouded with colour coded leads.Size "J". WW Primary 120,110 V Twin winding. Electrostatic screen.
250-0-250 at 60 mA. 6.3 V CT @ 1.5 A. 6.3-5-0 V @ 1.0 A for rectifier and pilot light. Generously designed mains transformer with low loss M6 core will power 1 or 2 channels. 50/60 Hz
Larger than original but still fits on chassis with minor modification

Price: £168.48 (Excluding VAT at 20%)

9330  Pulteq EQP-1A 2k5/10KCT Amp input

9330 Pulteq EQP-1A 2k5/10KCT Amp input

Ref: 660

Ratio 1:2 CT. Max input level +20 dBu. Sowter designed transformer similar to Triad HS-29. (1:2CT configuration only) Internal electrostatic shield to ensure good comon mode rejection for accurate phase splitting at high frequencies. Mumetal can with colour coded leads. Mounting options. Tested with Drip EPQ1A (9330E choose threaded grommet type ).

Price: £57.51 (Excluding VAT at 20%)

Options

9530  Pulteq EQP-1A 15K/600 PP Line op.

9530 Pulteq EQP-1A 15K/600 PP Line op.

Ref: 661

Ratio 10CT:1+1 4% NFB. Max output level +23 dBu. Total dc resistance 40 ohms ref secondary. Can be configured for 600 or 150 ohm secondary. 50% Mumetal core for exceptional bandwidth. Colour coded leads.

Price: £60.97 (Excluding VAT at 20%)

Data sheet

9530e  Pulteq EQP-1A 15K/600 PP Line op.

9530e Pulteq EQP-1A 15K/600 PP Line op.

Ref: 662

Ratio 10CT:1+1 4% NFB. Max output level +23 dBu. Total dc resistance 40 ohms ref secondary. Can be configured for 600 or 150 ohm secondary. 50% Mumetal core for exceptional bandwidth. Mumetal can with threaded grommet.
Tested with Drip EPQ1A (9530E)

Price: £78.82 (Excluding VAT at 20%)

Data sheet

1166 EMT 262 Reverb input transformer 1:35

1166 EMT 262 Reverb input transformer 1:35

Ref: 663

For replacement or recreation of this rare reverb unit. Interfaces between the plate and amplifier. Ratio 1:35. Mumetal core in Mumetal can 26 mm dia x 20 mm high with colour coded leads.

Price: £55.16 (Excluding VAT at 20%)

Page:   <<   <  1  2   View All (20)