MOVING COIL CARTRIDGE STEP UP TRANSFORMERS

9570 1:10 Low Z Cartridge Transformer
Very high performance transformer for use with cartridges with an impedance in the range 3 to 100 ohms. Cartidge loading 1000 ohms with a 100K okm secondary load. Bandwidth 5 Hz to 100 kHz. Two transformers are required for stereo. OCC wire option
Data sheet
Price: £61.55

OCC WIRE (£10.96 price increase)

9990 1:20 Low Z Cartridge Transformer
Very high performance transformer for use with cartridges with an impedance in the range 3 to100ohms. Ideal for low output cartridges. Cartridge loading adjustable with secondary load resistor. Bandwidth 3 Hz to 100 kHz. Two transformers are required for stereo. OCC wire option
Data sheet
Price: £61.55

OCC WIRE (£10.96 price increase)

9580 1:12.5 High Z Cartridge Transfomer
Very high performance transformer for use with cartridges with an impedance in the range 25 to 100 ohms. Bandwidth 5 Hz to 60 kHz. Suitable for Denon DL - 304 and DL - 103. Two transformers are required for stereo.

Data Sheet
Price: £61.55

1990 1:10/1:20 Low Z Cartridge Transformer
Very high performance transformer for use with cartridges with an impedance in the range 1 to100 ohms. Has two primary windings which can be configured in series or parallel for 1:10 or 1:20 ratio. Ideal if you are not sure if you have enough gain for a 1:10 cartridge. Cartridge loading adjustable with secondary load resistor. Bandwidth 5Hz to 100 kHz. Two transformers are required for stereo. OCC wire option
Data sheet
Price: £64.62

OCC WIRE (£10.96 price increase)

8055 Studio Phono Cartridge Transformer
Ratio 1:10 with full geometric balanced inputs and outputs. Biphase output for driving push-pull pre-amps but can be used with normal unbalanced input. For cartridges in the range 3 to 15 ohms 5 Hz to 100 kHz. Two transformers are required for stereo. OCC Wire option (Measured performance of OCC version may vary due to different wire size)
Data sheet
Price: £71.73

OCC WIRE (£12.77 price increase)

1090 1:2 Moving Magnet Cartridge Transformer
Transformer for use with MM cartridges with an internal impedance of around 500 Ohms. Cartridge loading will be greater than the 47K Ohms normally recommended by the manufacturers of MM cartridges but this transformer gives significant sonic improvements as well as some useful gain. Two transformers are required for stereo. OCC wire option
Test report
Price: £43.63

OCC WIRE (£10.96 price increase)

RIAA Transformer/ Inductor set
Set of 4 audio transformers and 4 inductors for the latest Steve Bench RIAA. This circuit does not use any capacitors. Set does not include PCB. Please contact support for more information
Schematic
Price: £439.94